MOTEK to Make a Grand Appearance at bauma SHANGHAI 2026
Release time: 2026-11-10
November 24– 27, 2026 | Shanghai New International Expo Centre | Hall E4, Booth 811

The largest stage for construction machinery in Asia—MOTEK has arrived
Held biennially, bauma CHINA stands as an essential landmark for the Asian construction machinery industry. In 2026, the event will debut a new “dual-venue” format, spanning both the Shanghai New International Expo Centre and the Shanghai World Expo Exhibition & Convention Center. Covering a total exhibition area of 400,000 square meters, the event will bring together nearly 4,000 exhibitors from over 30 countries and regions, with an anticipated 300,000 professional visitors.
A record-breaking scale implies record-breaking levels of attention. On a stage where global buyers, distributors, contractors, and mine operators converge, only those whose products truly stand up to scrutiny—proving their quality and durability—will be the ones that are remembered.
MOTEK, a specialized Chinese manufacturer of excavator attachments, will be present as scheduled, showcasing our most comprehensive product lineup.
Dates: November 24–27, 2026 | Venue: Shanghai New International Expo Centre (No. 2345 Longyang Road, Pudong New Area) | Booth: Hall E4, 811Four days, one booth, three major product lines—see it all in one place.
Launching on three fronts simultaneously—the true test unfolds within a single arena.
At this exhibition, rather than merely showcasing individual products, MOTEK has brought an entire operational chain—encompassing on-site material sourcing, crushing, screening, and reuse—directly to the venue. By featuring three core product lines—crushing buckets, screening buckets, and mixing attachments—the company presents a comprehensive, closed-loop solution for on-site operations.
The First Line: The Full Range of MOTEK Crusher Buckets—Turning Your Excavator into a Mobile Crushing Plant
With models including the MTC120, MTC200, MTC250, and MTC330, alongside the lightweight MTL series, MOTEK’s complete lineup of crusher buckets covers the entire spectrum of excavators—from 6-ton compact machines to 40-ton heavy-duty units.
These attachments solve a long-standing challenge: construction waste, concrete debris, mine tailings, and quarry offcuts are costly to haul away and burdensome to stockpile. A MOTEK crusher bucket enables an excavator to perform crushing operations right on-site—eliminating transportation costs, off-site disposal fees, and the time wasted on multiple rounds of handling.
Tangible, hard-data advantages:
The jaw plates are crafted from Mn18Cr2 high-manganese steel, which exhibits exceptional work-hardening properties under impact—becoming harder and more wear-resistant the more it is used.
Critical wear zones on the bucket body are constructed from high-strength, wear-resistant NM400/NM500 steel, offering a service life significantly longer than that of standard structural steel.
The discharge particle size is hydraulically adjustable, allowing a single bucket to accommodate both backfill grading requirements and the production of recycled aggregates.
Driven directly by a hydraulic motor, the unit integrates seamlessly with the host machine’s existing hydraulic system—simply plug it in and get to work, with no need for an external power source.
Line 2: Full Series of Screening Buckets—Unlocking Three Levels of Value from a Single Material
With models including the MTS204, MTS207, MTS317, MTS320, and MTS425, MOTEK’s range of screening buckets covers every application—from topsoil screening and aggregate grading to construction waste sorting.
Screening is more than just sorting; it is a process of re-evaluating and re-pricing waste materials.
Product Highlights:
Features various roller configurations and a quick-change design, allowing for multi-stage processing in a single bucket with adjustable output particle sizes.
Available with either rotating roller or vibrating mechanisms, ensuring efficient operation—even with wet, sticky, or high-clay-content materials—without clogging or buildup.
Perfectly matched to the tonnage class of MOTEK’s crushing buckets; by pairing a crusher with a screener, a single carrier machine can handle both primary crushing and subsequent screening, ensuring a seamless, continuous workflow.
At the MOTEK booth, a crusher bucket and a screening bucket will be displayed side by side, allowing visitors to see firsthand how an on-site, closed-loop “crushing-and-screening” operation is set up.
Line 3: Soil Processor Mixer—Bringing the Batching Plant to the Job Site
The third key component is the MOTEK soil power mixer.
It addresses a different set of high-frequency pain points: on-site soil improvement and stabilization.
The mixing head shifts this process directly to the work face, allowing an excavator to perform soil improvement and stabilization on the spot. This eliminates transportation costs, accelerates project timelines, and ensures precise control over mix ratios.
True “Hardcore” Quality Isn’t in the Spec Sheet—It’s in the Steel and the Welds
In the category of attachments, it’s all too easy to get caught up in a “spec sheet race.” MOTEK, however, prefers to focus on three tangible, concrete factors.
First: Materials. We use NM400 and NM500 wear-resistant steel for high-abrasion zones, and Mn18Cr2 high-manganese steel for high-impact zones. Rather than using a single type of steel for the entire bucket, we select materials based on specific operating conditions—applying high-hardness steel where wear is rapid, and high-toughness steel where impact is severe.
Second: Craftsmanship. We ensure consistent weld quality, and for critical structural components, we perform post-weld heat treatment to eliminate internal stress. Often, an attachment’s service life isn’t cut short by the steel itself, but by a failure at a weld seam.
Third: Compatibility. Every bucket is precisely calibrated and matched to the specific tonnage, arm length, and hydraulic flow rate of the host machine. It’s ready for work the moment it’s installed—no need for days of fine-tuning.
These three factors don’t appear on a spec sheet, yet they determine whether your bucket lasts for three months—or three years.
Open Collaboration: Channels, Agencies, and Customization
The value of bauma lies as much outside the exhibition booths as it does within them.
During this year’s exhibition, MOTEK is opening discussions for three types of collaboration:
Regional Distribution and Agency—Seeking regional partners for both domestic and international markets, with support provided in the form of demo units, pre-positioned spare parts, and technical and sales training. OEM and Customization—Developing bespoke attachments tailored to specific operating conditions or unique host-machine interfaces. Project-Based Solutions—Providing comprehensive attachment configurations for sectors such as mining, construction waste recycling, road maintenance, and municipal engineering.
In the construction machinery industry, success ultimately comes down to two things: what you can do, and how long you can keep doing it.
At MOTEK, we believe that a high-quality attachment should not merely be an accessory to the host machine, but an extension of its capabilities—transforming an excavator from a simple digging tool into a versatile machine capable of crushing, screening, and mixing.
November 24–27, Shanghai New International Expo Centre, Hall E4, Booth 811.
Explore our full range of crushing buckets, screening buckets, and mixing attachments—all in one place.
We look forward to seeing you at Booth 811.
Author

Lilly Liu
MOTEK Director of International Sales Equipped with 15 years of dedicated experience in the construction machinery industry, she has a deep understanding of global market dynamics and regional customer needs. She has successfully led teams to penetrate key international markets, particularly in promoting construction machinery attachments and securing high-value overseas orders.







